Author Topic: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7  (Read 601327 times)

Offline bandon

  • Member
  • ***
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #50 on: Wednesday April 13, 2011, 09:16:38 AM »
for some reason i managed to connect when not running as admin on vista pro i now need to get the save file working to check if i can really use the wifi but at least i managed to connect once without getting an error

it works i had to check all the squars on the left side of the emulation config box and use the 0.9.6 wifi version but it works
already managed to enter mystery gift with it, c gear is lsow when i tried to sync the game but doesn't matter at least i have wifi now

Offline Prectorian

  • Premium Member
  • ****
  • My Life is a Flat Tyre, It's Screwed!
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #51 on: Wednesday April 13, 2011, 02:29:47 PM »
UPDATE:

Pokemon-GL.com is finally up and running.
Tutorial: Tutorial from Serebii.net

I just did some testing for the:
1. Game Sync (Main Menu)
2. C-Gear (Dream World)
3. Battle Competition (Main Menu)
4. EntraLink/Entree Link (Bridge and Forest)

It all work. Make sure to perform Game Sync to acquire a Game Sync ID. Then make sure that you create an account in that website. And use the Game Sync ID to register in en.pokemon-gl.com for USA and EU version. Do this before you try to enter Dream World through your C-Gear (make sure to put a pokemon to sleep before hand), as for Battle Competition (make sure to place some pokemon in the battle box).
« Last Edit: Wednesday April 13, 2011, 04:00:37 PM by prectorian »

Offline -Eazy-

  • Member
  • ***
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #52 on: Wednesday April 13, 2011, 05:42:09 PM »
1. Reason why you get that message "ID not identical"

Its because in the CONFIG --> FIRMWARE SETTING and also if you had set up in the previous version for the 'Boot Firmware Like NDS' settings where you get to setup your DeSmuMe to mimic the NDS Console
user presets, does not match with the newer version of DeSmuMe that you had used. Thus the data recorded in the game save is not the same. You should have setup these ID before loading the game for the first time.

Likely you might have forgotten in the past, you might have altered the Firmware Setting or that the older version of DeSmuMe and the newer version does not contain the same firmware setting as the one you had used. That's what causes your lost of friend code.

2. Error Codes 50000, 52200, etc.

It all have to do with your WIFI connection and or the setup including cleareance by the firewall. If you can't use the SVN 3963, then try using the SVN 3947. DeSmuMe_VS2008 is the same as the SVN series, the numbers behind the SVN is to show the update changes. Again like I said before to the other poster, stick with what work, don't bother to much about following the updates.
a. Make sure the firewall properly exclude the WinPcap (CONTROL PANEL --> WINDOWS FIREWALL --> EXEPTIONS)
b. Make sure your WIFI connection is stable and all settings are setup properly
c. Go to the in-game setting under NINTENDO WFC SETTINGS, make sure to use SOFTAP and do the TEST CONNECTION
d. For Win Vista and Win 7, make sure to run in Admin Mode

Note:
I'm really busy with my real life lately, so I will not be available for long period at a time. So if anyone who had experience with utilizing the WIFI feature of DeSmuMe including troubleshooting, please step in and assist the other members that require assistance. And sorry if I can't always be available to answer your questions. Thanks.

@1

Tried it very often the Friendcode changes everytime it doesn´t matter if you change options in the "Emulation Config" and "Firmware Config".
I hate it too to change the Friend Code everytime.
No matter to set up the FC at the first start of the game because the Emulator simulates a DS without a HID so the Game don´t remember it and can´t compare the DS + Game.


Maybe I make something wrong.
Hope you can describe your "1." more detailed :) would be happy.

Is your Friend Code everytime when you start and close DeSmuMe the same ?


regards Eazy
« Last Edit: Wednesday April 13, 2011, 05:53:33 PM by -Eazy- »

Offline Prectorian

  • Premium Member
  • ****
  • My Life is a Flat Tyre, It's Screwed!
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #53 on: Thursday April 14, 2011, 11:56:24 AM »
@1

Tried it very often the Friendcode changes everytime it doesn´t matter if you change options in the "Emulation Config" and "Firmware Config".
I hate it too to change the Friend Code everytime.
No matter to set up the FC at the first start of the game because the Emulator simulates a DS without a HID so the Game don´t remember it and can´t compare the DS + Game.


Maybe I make something wrong.
Hope you can describe your "1." more detailed :) would be happy.

Is your Friend Code everytime when you start and close DeSmuMe the same ?


regards Eazy

Try looking at the tutorial on the PRE-SETUP instruction step 2.C.1 up to 2.C.3, I just added those last night. Try comparing the content between the older version you had used and the newer version. Is the setup for those the same? Try deleting your DeSmuMe Config.INI and recreate it by doing step 2.A and 2.B again. Maybe it will solve your issue. But if that does not solve the issue. Then I really do not know what other troubleshooter to provide to you. Really am sorry, I'm no expert on this as I'm not the one who made the DeSmuMe program. I tried looking up for that specific error solution for you but can't locate it yet.

But for your info, I did get that issue when I run a newer DeSmuMe before re-config the step 2.C.1 to 2.C.3 before loading a game. When I run the game save on the original DeSmuMe version that I had used to create the save file, the Friend Code is not effected. I've even tried checking on the Game Sync ID. I made a Game Sync ID last night, close it, log off my computer, restart the computer and the DeSmuMe, check the Game Sync ID again, and its still the same one. No changes.

But again, I'm really am sorry I can't be of much help. My knowledge on emulator is really limited. 
« Last Edit: Thursday April 14, 2011, 11:58:41 AM by prectorian »

Offline CoolKill3r

  • Member
  • ***
  • Guess who's daddy?
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #54 on: Thursday April 14, 2011, 02:28:40 PM »
I cant seem to get this running on my Windows 7 (64 bit)
And i keep getting this "Error 5200" line after testing the connection with the game: Mario Kart DS (E)(M5)(0201)

I did all that is told on the first post, the settings i've done correct and to run DeSmuME in admin mode.
The only 2 things i aint sure about is the Ethernet thingy, here i only see a line saying Microsoft nothing about Ethernet
And as for WinPcap i'm not sure if my firewall accepts it but i dont know how to make it do so.

B.T.W.: When i test the connection it starts showing a green full connection and after a while it goes weak to red and gives me the "Error 5200".
« Last Edit: Thursday April 14, 2011, 02:50:44 PM by CoolKill3r »

Offline iamflip

  • Member
  • ***
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #55 on: Thursday April 14, 2011, 05:24:25 PM »
thanx for responding..but how do u get the settings to save(the birthday fav colour nickname etc)

Offline Prectorian

  • Premium Member
  • ****
  • My Life is a Flat Tyre, It's Screwed!
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #56 on: Friday April 15, 2011, 12:56:12 AM »
thanx for responding..but how do u get the settings to save(the birthday fav colour nickname etc)

I simply do step Pre-setup no. 2.C.1 up to 2.C.3. And have to do nothing else. For me it just save the setting automatically after I press OK, and each time I play/return to play those settings are there. So I really don't know why in your case it it kept going missing each time you close/shut down the DeSmuMe or your computer.

I cant seem to get this running on my Windows 7 (64 bit)
And i keep getting this "Error 5200" line after testing the connection with the game: Mario Kart DS (E)(M5)(0201)

I did all that is told on the first post, the settings i've done correct and to run DeSmuME in admin mode.
The only 2 things i aint sure about is the Ethernet thingy, here i only see a line saying Microsoft nothing about Ethernet
And as for WinPcap i'm not sure if my firewall accepts it but i dont know how to make it do so.

B.T.W.: When i test the connection it starts showing a green full connection and after a while it goes weak to red and gives me the "Error 5200".

If you can't get it running on SVN 3963 or newer, try the older version such as SVN 3947. The download link is on page 1.

As for the finding out if your firewall has given access to your WinPcap. Do this:
START --> CONTROL PANEL --> WINDOWS FIREWALL --> EXCEPTIONS ---> tick "rpcapd"
If its not in the exceptions list, then you'll have to locate it in the WinPcap folder in the destination where you had saved the program during setup/installation.

As for that issue where the small WIFI icon turn from green to red, that shows either 2 things;
1. your ethernet LAN is unstable
2. you had not set in the INFRASTRUCTURE under the WIFI SETTING to use the proper Ethernet hardware.
*Look into your NETWORK CONNECTION and see the CONNECT to find out which hardware your Cable LAN is running on.

PS: I've added 10 pictures for Mario Kart DS in the Preview Section in the tutorial.
« Last Edit: Friday April 15, 2011, 02:01:49 AM by prectorian »

Offline CoolKill3r

  • Member
  • ***
  • Guess who's daddy?
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #57 on: Friday April 15, 2011, 07:49:28 AM »
I simply do step Pre-setup no. 2.C.1 up to 2.C.3. And have to do nothing else. For me it just save the setting automatically after I press OK, and each time I play/return to play those settings are there. So I really don't know why in your case it it kept going missing each time you close/shut down the DeSmuMe or your computer.

If you can't get it running on SVN 3963 or newer, try the older version such as SVN 3947. The download link is on page 1.

As for the finding out if your firewall has given access to your WinPcap. Do this:
START --> CONTROL PANEL --> WINDOWS FIREWALL --> EXCEPTIONS ---> tick "rpcapd"
If its not in the exceptions list, then you'll have to locate it in the WinPcap folder in the destination where you had saved the program during setup/installation.

As for that issue where the small WIFI icon turn from green to red, that shows either 2 things;
1. your ethernet LAN is unstable
2. you had not set in the INFRASTRUCTURE under the WIFI SETTING to use the proper Ethernet hardware.
*Look into your NETWORK CONNECTION and see the CONNECT to find out which hardware your Cable LAN is running on.

PS: I've added 10 pictures for Mario Kart DS in the Preview Section in the tutorial.

Oke well i added "rpcapd" to the exceptions list but had to do it in Norton.
And like i said i did everything i needed to do during the setup also had it set on INFRASTRUCTURE.
I also tryed the same with the SVN 3947 version but it didnt work.

Here are some screens:
Spoiler (click to show/hide)

Offline Prectorian

  • Premium Member
  • ****
  • My Life is a Flat Tyre, It's Screwed!
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #58 on: Friday April 15, 2011, 08:43:10 AM »
Oke well i added "rpcapd" to the exceptions list but had to do it in Norton.
And like i said i did everything i needed to do during the setup also had it set on INFRASTRUCTURE.
I also tryed the same with the SVN 3947 version but it didnt work.

Here are some screens:
Spoiler (click to show/hide)

Based on your images, that bridge network adaptor is the issue...it should have contain more than just 'Microsoft' in the drop down list, at least another one, such as "Intel Gigabit Network" or 'Atheros PCI' or Realtek Fast' or other Ethernet LAN hardware brand. Are you even sure you're running a LAN cable broadband and that you have the hardware in it? Cause it seems from the image, you don't have that Ethernet capable hardware.

Update:
Added new pictures in the preview section for Pokemon Black and White for C-Gear and Dream World. Confirmed both accessable via DeSmuMe to play on the official website. I played a full 1 hour in the Dream World.

PS: Newly added images for the Dream World is rather messy as I didn't resize it properly.

« Last Edit: Friday April 15, 2011, 08:49:03 AM by prectorian »

Offline CoolKill3r

  • Member
  • ***
  • Guess who's daddy?
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #59 on: Friday April 15, 2011, 08:50:08 AM »
Based on your images, that bridge network adaptor is the issue...it should have contain more than just 'Microsoft' in the drop down list, at least another one, such as "Intel Gigabit Network" or 'Atheros PCI' or Realtek Fast' or other Ethernet LAN hardware brand. Are you even sure you're running a LAN cable broadband and that you have the hardware in it? Cause it seems from the image, you don't have that Ethernet capable hardware.

Update:
Added new pictures in the preview section for Pokemon Black and White for C-Gear and Dream World. Confirmed both accessable via DeSmuMe to play on the official website.

Well i dunno but maybe this helps.
My router broke down and now i dont use that anymore but the modem itself.
So instead of: Modem --> router --> PC
Its now like: Modem --> PC
I'm getting a wireless router soon.

Offline Prectorian

  • Premium Member
  • ****
  • My Life is a Flat Tyre, It's Screwed!
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #60 on: Friday April 15, 2011, 08:59:12 AM »
Well i dunno but maybe this helps.
My router broke down and now i dont use that anymore but the modem itself.
So instead of: Modem --> router --> PC
Its now like: Modem --> PC
I'm getting a wireless router soon.

I'm not using a router either. But you do need to connect through the LAN Cable line (not the phone cable or even wireless). But really, I'm wondering why your Bridge Network Adaptor only contain 1 option in the drop down menu when it should have been more options to choose from. Which is rather strange. My Win 7 contain both the 'Microsoft' and 'Atheros' in the drop box; my laptop is ACER brand. Maxmahito who seems to have Win 7 too has a different hardware which run on 'Intel Gigabit', not sure what laptop brand he's using. Toshiba usually carry 'Realtek' brand. You need to find out if your laptop have other bridge adaptor in it or not. Cause it just seems so strange that you have only 1 option in the adaptor list. If there is, you should enable it through the Network Connection Setup under Control Panel.
« Last Edit: Friday April 15, 2011, 01:09:44 PM by prectorian »

Offline -Eazy-

  • Member
  • ***
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #61 on: Friday April 15, 2011, 02:25:46 PM »
@prectorian

How you exit the menu at "2.c.1" with the green icons ?
When I try to exit the menu with reset he resets the settings back to "Setya".

regards Eazy

Offline Loonylion

  • Administrator
  • *****
  • Gender: Male
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #62 on: Friday April 15, 2011, 03:00:05 PM »
microsoft does not make network adaptors, anything with microsoft in the name will be a virtual one that is no use for this purpose. The 'bridge adaptor' you refer to is a virtual adaptor that joins two physical network adaptors, if you do not have any physical network adaptors then you are SOL before you even start.

Offline CoolKill3r

  • Member
  • ***
  • Guess who's daddy?
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #63 on: Friday April 15, 2011, 04:50:39 PM »
microsoft does not make network adaptors, anything with microsoft in the name will be a virtual one that is no use for this purpose. The 'bridge adaptor' you refer to is a virtual adaptor that joins two physical network adaptors, if you do not have any physical network adaptors then you are SOL before you even start.

Owkee?
Still i dont know how i could fix this problem, do i need to buy new hardware?

Offline Loonylion

  • Administrator
  • *****
  • Gender: Male
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #64 on: Friday April 15, 2011, 06:48:15 PM »
if you don't have a network adaptor then clearly your internet connection does not use one. (maybe its dial up or USB based?) if you do have a network adaptor and its not showing then maybe its just not compatible with the software you're trying to use.

Offline bandon

  • Member
  • ***
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #65 on: Friday April 15, 2011, 08:07:28 PM »
you say you were able to use the bridge, how do you do that? every time i try to use the bridge i starts searchign ut never really connects to the wifi so ofcourse it never finds anyone

Offline Prectorian

  • Premium Member
  • ****
  • My Life is a Flat Tyre, It's Screwed!
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #66 on: Saturday April 16, 2011, 12:46:01 AM »
How you exit the menu at "2.c.1" with the green icons ?
When I try to exit the menu with reset he resets the settings back to "Setya".

regards Eazy

You mean step 2.C.3.? Cause step 2.C.1 is obvious.....just press OK once you have fill up all the boxes. Just keep the "Message box" empty/blank.

E.g. for step 2.C.3.
You load a game in Boot Like NDS mode, fill up the database (in the green icon), you press CONFIRM and it will show a black box saying about saving the newly added info, then you are returned to the main menu again, press GO BACK (B), then press QUIT (B), and a black box saying that it will shut down, you press YES (A), it will now show the main DeSmuMe screen (black screen), now press FILE and rechoose the game you want to play.


you say you were able to use the bridge, how do you do that? every time i try to use the bridge i starts searchign ut never really connects to the wifi so of course it never finds anyone

To use entralink:
Devilkid32176's Tutorial topic for EntraLink: Click Here to Visit this Romulation Thread

Explaination about EntraLink: Visit this Pokemon Wiki from Bulbapedia

Explaination about EntraLink and Entree Forest: Visit this Pokemon Wiki from Serebii

Explaination about Pokemon Dream World: Dream World Explaination from Bulbapedia


Quote from: Internet and Networking for Beginners
Get to know the basics of Network Connections : Network Connection Explaination from Microsoft
Get to know the basics of Internet : Explaination from Princeton University
Get to know the basics of Internet : Internet Hardware Explaination for Beginners from About.com
What is LAN (Local Area Network) : LAN Explaination from Wikipedia
What is Ethernet : Ethernet Explaination from Wikipedia
What is DSL/ADSL Modem : DSL/ADSL Explaination from Wikipedia
What is TCP/IP : TCP/IP Explaination from Wikipedia
Know the Internet Hardware : Broadband Hardware Explaination from Broadbandinfo.com
Bridge Network : Explaination of Bridge Network from Microsoft
« Last Edit: Saturday April 16, 2011, 01:08:09 PM by prectorian »

Offline M.AzaryPika3172

  • Member
  • ***
  • Gender: Male
  • I am Popeye The Sailor Moon
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #67 on: Saturday April 16, 2011, 04:55:26 AM »
Thanks for the program! I will try anytime. Plus, the latest SVN for Desmume is 3978 from EmuCR website.

Offline bandon

  • Member
  • ***
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #68 on: Saturday April 16, 2011, 07:18:31 AM »
thanks now i know it's not a wifi problem but a story line problem
but since it just means i need to advance in story line it's no big problem

Offline Prectorian

  • Premium Member
  • ****
  • My Life is a Flat Tyre, It's Screwed!
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #69 on: Saturday April 16, 2011, 07:35:31 AM »
Thanks for the program! I will try anytime. Plus, the latest SVN for Desmume is 3978 from EmuCR website.

Yes, I'm aware of the updated versions. But frankly the most stable for this WIFI business is SVN 3947 based on my experience. The newer ones, can be a pain in the ass as it goes into error more often than it connect. Not sure why.

Post Merge: Saturday April 16, 2011, 07:41:10 AM
thanks now i know it's not a wifi problem but a story line problem
but since it just means i need to advance in story line it's no big problem

If you want to use the Entree Bridge, just follow the tuturial from Devilkid. If its a wifi issue, you won't even be able to get to the Entree Area through the C-Gear options. As for the Entree Forest, you can only make use after your pokemon wakes up from the dream world. Otherwise you'll only be seeing an empty forest. All the areas/features that I show in the preview section is not accessable if your wifi is not working.
« Last Edit: Saturday April 16, 2011, 07:41:10 AM by prectorian »

Offline -Eazy-

  • Member
  • ***
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #70 on: Saturday April 16, 2011, 12:48:44 PM »
You mean step 2.C.3.? Cause step 2.C.1 is obvious.....just press OK once you have fill up all the boxes. Just keep the "Message box" empty/blank.

E.g. for step 2.C.3.
You load a game in Boot Like NDS mode, fill up the database (in the green icon), you press CONFIRM and it will show a black box saying about saving the newly added info, then you are returned to the main menu again, press GO BACK (B), then press QUIT (B), and a black box saying that it will shut down, you press YES (A), it will now show the main DeSmuMe screen (black screen), now press FILE and rechoose the game you want to play.


To use entralink:
Devilkid32176's Tutorial topic for EntraLink: Click Here to Visit this Romulation Thread

Explaination about EntraLink: Visit this Pokemon Wiki from Bulbapedia

Explaination about EntraLink and Entree Forest: Visit this Pokemon Wiki from Serebii



Don´t work settings resets automaticly after shutdown to "Setya".
Set all my Information like in "Config -> Firmware" then "End -> Shutdown" got a black screen loaded my .nds game.
Result: NDS Firmware was reseted standard to "Setya".
« Last Edit: Saturday April 16, 2011, 01:00:44 PM by -Eazy- »

Offline Prectorian

  • Premium Member
  • ****
  • My Life is a Flat Tyre, It's Screwed!
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #71 on: Saturday April 16, 2011, 01:23:44 PM »
Don´t work settings resets automaticly after shutdown to "Setya".
Set all my Information like in "Config -> Firmware" then "End -> Shutdown" got a black screen loaded my .nds game.
Result: NDS Firmware was reseted standard to "Setya".

That's strange. Maybe there's something that you had missed. Cause the steps in the tutorial is already the proper method and should have shown no issues, and I've even elaborate further in the posts. Thus I have ran out of further advice to provide on this issue of yours. Best is you check and recheck what might you had forgot doing or try solving by trial and error.
« Last Edit: Saturday April 16, 2011, 01:34:32 PM by prectorian »

Offline kaiserorn

  • Member
  • ***
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #72 on: Saturday April 16, 2011, 01:38:58 PM »
Hi, I have 2 problems and 1 question:
1p- When I start emulator and run rom i read in cmd, Firmware: save config - failed, i try to reset biosnds9, biosnds7 and firmware, but nothing. So when i tray to connet to SoftAP I have error: 50000
2p- I cannot config firmware data (as previous post said), so i try to put in dialog od desmume data that i read in emulator (e.g. name = Setya).

1q- Is it possible play with a friend ? In other words, is it possible make a battle/trade pokemon with a friend that also use DeSmuMe as me ?

Thx in advance

P.S. Good Job!

Offline maxmahito

  • Member
  • ***
  • Gender: Male
  • Messenger of Almighty entertainment
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #73 on: Saturday April 16, 2011, 03:08:44 PM »
Is it possible play with a friend ? In other words, is it possible make a battle/trade pokemon with a friend that also use DeSmuMe as me ?
It may be possible with Friend Codes.Don't know for sure though.But, infrared and wireless won't work.

Offline Prectorian

  • Premium Member
  • ****
  • My Life is a Flat Tyre, It's Screwed!
Re: [TUTORIAL] Guide to Enable WIFI Feature On DeSmuMe v.0.9.7
« Reply #74 on: Saturday April 16, 2011, 04:13:45 PM »
It may be possible with Friend Codes.Don't know for sure though.But, infrared and wireless won't work.

Infra Red is for sure not going to work cause DeSmuMe does not emulate IR function. But for Wireless...you can make use of the entralink feature (I've not tested the other function found in the wireless option in the C-Gear). I've tested playing in the dream world. I planted a berry and harvested it, and made friend with a pokemon in the dream world. That new pokemon and item when you wake up, can be retrieve at the Entree Forest inside the Entre Link area.

To play in the dream world, you need to do :
1. Create an Account in pokemon-gl.com
2. Do GAME SYNC from the Main Menu to get GAME SYNC ID to use also in the pokemon-gl.com registration
3. Turn on C-Gear and go ONLINE to make a pokemon sleep
4. Go to the Dream World in the webpage at the same time while doing step 3
5. After the intro and info, you get to play in the dream world and transfer whatever item or pokemon you get to your save file.
6. Get the pokemon/item by going to the Entree Forest via EntraLink that can be access from the C-Gear's Wireless option. But you need to be within the EntraLink network for the feature to function.

** Doing all the above might be time consuming depending on how fast your internet and computer. It took me more than 3 minutes to do step 2 - 4 before the pokemon finally sleep and show up in the webpage's dream world. During play in the dream world, best is not to switch off the DeSmuMe. But of cause it will slow down your computer's processor with both DeSmuMe and webpage running at the same time if your computer spec is average.
« Last Edit: Saturday April 16, 2011, 04:18:18 PM by prectorian »